4X11X4 Bearing 694-ZZ

(1 review) Write a Review
  • 694-ZZ-Bearing
  • 4X11X4 Bearing 694-ZZ
  • 4X11X4 Bearing 694-ZZ


RCBearings.com logo 

4X11X4 Bearing 694-ZZ

ID: 4  MM
OD: 11 MM
TH: 4 MM
Race Material: AISI52100 Bearing Steel
Ball Material: AISI52100 Bearing Steel
Retainer: Mild Steel
Enclosure: Metal Shields



RCBearings only sells high quality industrial grade bearings.  Most are ABEC-3 or better tolerance class.  All are CN clearance unless otherwise specified.  We do NOT sell bulk unknown grade bearings from wholesalers.  All of our bearings come direct from manufacturers that we have worked with for many years, some for 30 years, so you can be assured of consistent high quality. Some of our bearings are made specifically for us and are not generally available anywhere else.

If there is a bearing you need but is not listed here, please call us and we will see if it is available from one of our suppliers. Please be advised that it can take up to 30 days to have bearings made.

If you have any questions, please call us at the number above or click the red CHAT area at the top-left of the screen.  If we don't answer right away we are either away from the computer or chatting with someone else.  Just leave us a message.


View AllClose

1 Review

  • 2
    These bearings are a loose fit on the shaft

    Posted by Unknown on 31st Mar 2014

    These bearings have a loose fit on the shaft. This allows too much radial play to be of any use.
    Have subsequently purchased NSK bearings which are much better.

    I would guess that your shaft was slightly undersized since I sell hundreds of these for helis with no complaints about fit. If you had contacted me, I would have refunded you.

    Paul McIntosh

View AllClose